Compact and easy to use
One, two or three channels – the R&S HMC804x DC Power supplies with their specifications and wide range of functions are ideal for use in development labs and industrial environments. Thanks to their high energy efficiency, the power supplies remain cool and quiet, even at maximum load. Practical interfaces and connectors allow users to work quickly and conveniently with the R&S HMC804x. Comfort functions enable the instruments to be used in special applications.
Key facts
Clear display of all measured parameters
Galvanically isolated, floating and short-circuit proof outputs
Protective functions adjustable for each channel
Ideal power supply for hardware developers and labs
Remote control
Electrical specifications |
|
Number of output channels |
1/2 |
Total output power |
max. 100 W |
Maximum output power per channel |
100 W/50 W/33 W |
Output voltage per channel |
0 V to 32 V |
Maximum output current per channel |
10 A/5 A/3 A |
Voltage ripple and noise (20 Hz
to 20 MHz) |
R&S®HMC8041: < 1 mV (RMS)
R&S®HMC8042/43: < 450 µV (RMS) |
Current ripple and noise (20 Hz
to 20 MHz) |
R&S®HMC8041: < 1.5 mA (RMS)
(meas.) R&S®HMC8042/43: < 1 mA (RMS) (meas.) |
Load recovery time (10 % to 90 %
load change within a band of ± 20 mV of set voltage) |
< 1 ms (meas.) |
Programming resolution voltage |
1 mV |
Programming resolution current |
< 1 A: 0.1 mA (R&S®HMC8041:
0.5 mA)≥ 1 A: 1 mA |
Output measurements |
|
Readback resolution voltage |
1 mV |
Readback resolution current |
< 1 A: 0.1 mA (R&S HMC8041:
0.5 mA) ≥ 1 A: 1 mA |
Readback accuracy voltage ±(% of
output + offset) |
< 0.05 % + 2 mV |
Readback accuracy current ±(% of
output + offset) |
typ. < 0.05 % + 4 mA
(R&S HMC8041: typ. < 0.15 % + 10 mA) |
Special functions |
|
Measurement functions |
voltage, current, power, energy |
Protection functions |
OVP, OCP, OPP, OTP |
FuseLink function |
● |
Fuse delay at output-on |
● |
Sense function |
● |
Sink mode |
- |
Output sequencing |
● |
Trigger input/output |
● |
Arbitrary function |
● (EasyArb) |
Analog/modulation interface |
● |
Data logging |
● |
Display and interfaces |
|
|
|
Display |
3.5" QVGA |
Rear panel connections |
connector block with 4 lines per
channel |
Remote control interfaces: standard |
USB, LAN; R&S HMC804x-G models
with IEEE-488 (GPIB) |
Remote control interfaces: optional |
|
General data |
|
Dimensions (W × H × D) |
222 mm × 97 mm × 291 mm |
Weight |
2.6 kg |
Rack installation |
R&S HZC95 option |
Available models |
||||
Models |
Number
of output channels |
Max. output power |
Output voltage per channel |
Output current per channel |
R&S®HMC8041 |
1 |
100 W |
0 V to 32 V |
10A |
R&S®HMC8041-G |
5 |
100 W |
0 V to 32 V |
10A |
R&S®HMC8042 |
2 |
100 W |
0 V to 32 V |
5A |
R&S®HMC8042-G |
2 |
100 W |
0 V to 32 V |
5A |
R&S®HMC8043 |
3 |
100 W |
0 V to 32 V |
3A |
R&S®HMC8043-G |
3 |
100 W |
0 V to 32 V |
3A |